Stock Sample is Free & Available
Acceptance: OEM/ODM
Name |
Ftth Heat Shrink Sleeve with One Needle Rod in 201SS Super Diameter |
Spec. |
1.2*60*304 |
Use | FTTx&FTTH |
Material | EVA |
Length | 60mm |
Steel Rod | 201 |
Steel Rod Number | 1 |
Use For | Fiber Distribution Box |
FTTH fusion fiber sleeves is mainly used for bare fiber fusing in communication products such as broadband network box, fiber distribution box, fiber panel and so on, specially designed for FTTH fiber to home project. It can weld all the leather cable or the leather cable and the single core jump fiber in the jacket tube by means of hot fusion.
(1) heat shrinkable tube
(2) hot melt tube
(3) stainless steel needle
1. Continue operating Temperature:-45°C~125°C;
2. Shrink Temperature :Start at 70°C;full recovery at 125°C;
3. Inner layer glue melt temperature:70°C~100°C;
4. Shrinking ratio:2:1,3:1, 4:1
5. Waterproof , RoHS compliant, outer layer Flame-retardant.
6. Standard color: Transparent (Other color available upon request.)
7. Protecting splicing point;
8.Improve mechanical strength;
9. Simple operation, reducing the risk of fiber damage during installation;
10. Does not affect the optical characteristics of the optical fiber;
11.Sealing structure to have good resistance of temperature and humidity performance
The heat shrink tube is for insulation and protection of components, terminals, wiring connectors and wiring strapping, marking and identification mechanical protection.
In addition to increasing the mechanical strength of the optical fiber joint, the most important role of optical fiber heat shrinkable tube is to play a filling and sealing role to avoid residual bubbles in the protective tube and prevent moisture intrusion, thereby maintaining the long-term stability of optical fiber transmission performance.