Bare Fiber Optic Protection
Bare fiber protection tubes usually refer to tubular protection devices used to protect exposed optical fiber lines. This tube protects fiber optic lines from physical damage and environmental influences. It is commonly used in indoor and outdoor wiring environments.
The production process of bare fiber protection tube generally includes the following steps:
(1)Material preparation: select high-quality materials, such as polyvinyl chloride (PVC), polyethylene (PE), etc. Select the appropriate pipe material based on the required length and diameter.
(2)Cutting: Cut the selected pipe to the required length, ensuring that the cuts are neat and the edges are smooth.
(3)Processing: Process the pipe as needed, such as processing it into an open shape, with a buckle or a joint for easy installation and use.
(4)Heat treatment: If the toughness and durability of the pipe need to be enhanced, heat treatment can be performed to make it more wear-resistant and pressure-resistant.
The functional features of bare fiber protection tubes usually include:
(1)Protection: It can effectively prevent the optical fiber line from external physical damage, such as extrusion, stretching, bending, etc., and extend the life of the optical fiber.
(2)Corrosion resistance: It has good corrosion resistance and can protect optical fiber lines from chemical substances and environmental corrosion.
(3)Anti-aging: It has certain weather resistance and can maintain stable performance for a long time under different environmental conditions.
(4)Flexibility: It has a certain degree of flexibility and is easy to install and maintain.
(5)Environmental protection: It is made of materials that meet environmental protection requirements and has no pollution to the environment.
Bare fiber protection tubes play an important role in the optical fiber communications industry and network cabling, helping to protect and maintain the safe operation of optical fiber lines.
Micro Shrink Tube
Micro heat shrink tubing is a material used to insulate and connect wires, usually made of polyvinyl chloride or other thermoplastic materials. It shrinks when heated to form a tight covering that provides insulation protection and cable retention. Micro heat shrink tubing is suitable for occasions where fine insulation and protection of wires is required in small or special environments.
The production process of micro heat shrink tubing includes the following steps:
(1)Raw material preparation: Select appropriate polyvinyl chloride or other thermoplastic materials as raw materials, and add pigments or other additives as needed.
(2)Extrusion molding: The raw materials are extruded through an extruder to form round tubular raw materials.
(3)Cutting: Cut the extruded tubular raw material into micro heat shrinkable tubes of the required length.
(4)Printing and marking: According to needs, print or mark product information and other contents on the micro heat shrink tube.
(5)Packaging: Packaging of micro heat shrink tubing in preparation for sale or use.
Features of micro heat shrink tubing include:
(1)Insulation protection: It has good insulation performance and can effectively protect wires from the external environment.
(2)Size shrinkage: During the heating process, it can shrink to half its original size or less, completely covering the wire and providing tight protection.
(3)Waterproof and moisture-proof: It can effectively prevent water and moisture from intruding into the wires, extending the service life of the wires.
(4)Corrosion resistance: Resistant to chemical corrosion, suitable for a variety of harsh environments.
(5)Wide temperature range: Able to maintain stable performance over a wide temperature range.
(6)Easy to use: The production process is simple and easy to use, and can be processed with a heat gun or other heating tools.
Indoor FTTH Protection Boxes
Indoor FTTH Protection Boxes is usually used to protect cables and line connection parts from external damage and environmental impact. This kind of protective box is usually used in outdoor, factory, warehouse and other environments to provide additional protection and safety for the cable connection part.
The production process of leather cord protection box includes the following steps:
(1)Design and planning: Determine the size, shape, material and functional requirements of the leather cord protection box, and conduct detailed design and planning.
(2)Material preparation: Based on design specifications and requirements, appropriate materials, such as plastic or metal, are selected, prepared and sourced.
(3)Make the mold: Make the mold according to the design drawings to form the shell part of the protective box.
(4)Material cutting and shaping: The prepared materials are cut and shaped according to the design requirements to produce each component of the protective box.
(5)Parts processing: Processing and processing of accessories and connecting parts of the protective box for subsequent assembly and use.
(6)Parts assembly: Assemble the formed shell parts, accessories and connecting parts to form a complete leather cord protection box.
(7)Testing and inspection: Test and inspect the produced leather cable protection box to ensure that it meets the design requirements and functional requirements.
The functional features of the leather cord protection box include:
(1)Waterproof and dustproof: It can effectively protect cables and line connections from rain, dust and other environmental factors.
(2)Impact resistance: It has certain impact resistance and can protect the connecting part from damage when being impacted externally.
(3)Weather resistance: able to maintain stable performance under harsh environmental conditions, such as high temperature resistance, low temperature resistance, UV resistance, etc.
(4)Sealing performance: It has good sealing performance, which can ensure the sealing of the connecting parts and protect the cables and lines from moisture.
(5)Safety: It can provide additional safety protection for the cable connection part to reduce the occurrence of accidents and damage. These functional features make the leather cable protection box play an important protective role in outdoor and industrial environments, ensuring the normal operation of power systems and communication systems.
Post time: Mar-07-2024